Bin locations
1 · What this page is for
2 · At a glance
Occupied bins
0
660 empty storage / FG bays
Empty bins
660
No qty on hand
Frozen bins
2
A-4-1 and other frozen bins
Fill percent
0%
0 misplaced
3 · Main job
Waiting LPs · RCV-01
Putaway gunNo received LPs waiting at the dock.
Same lookup as tapping a bay. A-4-1 stays HOLD — this does not unfreeze it.
Reorg in progress
Fill 0% (target 20%) · reorg 0% · 0 misplaced · 0 temps on the clock
Month starts packed and mixed. Temps pull loads back to the right zone until the racks sit about one-fifth full.
Selective pallet rack, 26 ft × 100 ft. Five beam levels, 10 ft bays hold at least 3 standard 40×48 pallets. Rows A–M back to back. 0/650 bays holding stock.
Pick aisle 1
Pick aisle 2
Pick aisle 3
Pick aisle 4
Pick aisle 5
Pick aisle 6
South wall · row M
Row A elevation · Frames
5 tiers · 26 ft tall · 10 × 10 ft bays · 100 ft run
A.section.tier
Tap a row for the 26 ft elevation. Each 10 ft bay shows three pallet faces. Tap a bay to set the opening inches for odd-size loads.
4 · Extra detail
- Frozen bin list includes A-4-1 HOLD.
- No unfreeze on this page.
No misplaced bins flagged.
After this job → Holds · Escalate a mismatch
How we do this job
26 ft × 100 ft selective rack, 5 tiers, 10 ft bays, rows A–M back-to-back.
- Each 10 ft bay holds at least three standard 40×48 pallets. Racks run about 20% full — the loop supermarket is what feeds the rail.
- Tap a bay to change opening inches or pallet faces. That does not move stock; it only changes how many loads fit.
- Month starts messy — mixed zones and ~80% fill. Temps pull loads back to the right aisle until fill sits near 20%.
- Run a reorg pass here, or play the month on JDE and let temps work. Manager hires/releases temps on Manager.