Quickie MWD 24V
Quickie Q700 M
Rehab mid-wheel. Power back, elevating hangers, 24V.
Kit status
KR-Q700M
16 required lines short. Receive missing parts, then build.
Dealer orders start as a quote on Sales. CS converts them. This kit is cover, or a shop-floor start.
Bill of material
| Part | Need | On floor | Where | Status |
|---|---|---|---|---|
| WC-CHS-MWD Quickie MWD chassis (swing-aways + casters on) | 1 EA | 0 | No bin | Short 1 |
| WC-PWR-MOD 24V power module | 1 EA | 0 | No bin | Short 1 |
| WC-LEAD-MTR Motor lead pair | 1 EA | 0 | No bin | Short 1 |
| WC-WHL-MWD MWD drive wheel | 2 EA | 0 | No bin | Short 2 |
| WC-BAT-G2 24V Group 2 battery pair | 1 EA | 0 | No bin | Short 1 |
| WC-ORING-18 Motor seal O-ring 18mm — often missing from the drawing | 2 EA | 0 | No bin | Optional |
| WC-HUB-PRE Drive hub kit (marked preassembled; ~25% arrive loose) | 2 EA | 0 | No bin | Short 2 |
| WC-HDW-KIT Standard hardware kit | 1 EA | 0 | No bin | Short 1 |
| WC-FUSE-24V 24V power fuse pair | 1 EA | 0 | No bin | Short 1 |
| WC-LIGHT-HRN Lighting harness (bulk crate, not pre-loomed) | 1 EA | 0 | No bin | Short 1 |
| WC-LIFT-ORING Lift piston O-ring — drawing gap on Q700 seating | 1 EA | 0 | No bin | Optional |
| WC-CTL-VR2 VR2 controller | 1 EA | 0 | No bin | Short 1 |
| WC-JST-STD Standard joystick | 1 EA | 0 | No bin | Short 1 |
| WC-LIFT-MOD Power lift module (gantry) | 1 EA | 0 | No bin | Short 1 |
| WC-TILT-MOD Power tilt module (gantry) | 1 EA | 0 | No bin | Short 1 |
| WC-CSH-20-GL 20" gel cushion | 1 EA | 0 | No bin | Short 1 |
| WC-SPACER-ST Seat depth spacer pack | 1 EA | 0 | No bin | Short 1 |
| WC-BCK-PWR Power seating back | 1 EA | 0 | No bin | Short 1 |
| WC-ARM-FUL Full-length armrest pair | 1 EA | 0 | No bin | Short 1 |
| WC-FTR-ELV Elevating legrest pair | 1 EA | 0 | No bin | Short 1 |
| WC-CHG-8A 8A battery charger | 1 EA | 0 | No bin | Short 1 |
SOP · WheelchairsStandard work
Configurations, kit check, lifecycle (current / incoming / discontinued).
- Only current production chairs start a work order. Incoming 2026 chairs wait on ME work instructions. Discontinued chairs are service parts only.
- Run kit check before starting a work order. Short kits go on hold.
- Start hot from here only when CS has already named the diagnosis.
- Gantry parts (batteries, lift, tilt) are not carted. They stay at the station.